BRK024

Make sure your walls are dust free and are smooth. Any imperfections in the wall can come through and show on the wallpaper.

Clean the wall with a dry cloth, and used soap and water to remove any residue.

Let the wall dry before starting.

All wallpaper is rolled with the first piece being on top. Once your wall is dry use some masking tape and line up the first piece on the wall.

Again. make sure the wall is dry before doing this. 

Peel away the backing paper at the top, and remove about 6″ to get started. Curl the backing paper down so you can pull it as you squeegee. 

Squeegee the top, and Slowly squeegee down about a 0.5″ to 1″ at a time with the felt side of the supplied squeegee. 

Review the instructions included with your purchase.

The shipped instructions will let you know how much you need to overlap each piece depending on the design purchased. 

Continue putting pieces up with this overlap.

Your last piece will be wider than you ordered. Be prepared to squeegee it into the right side and cut excess with an xacto knife – Be careful not to cut into the next surface. We recommend wearing a cut resistant glove to protect yourself.